What are the operating principles for aluminum alloy CNC processing?

CNC machining of aluminum alloy has great advantages over manual processing, such as CNC machining produced aluminum alloy parts are very accurate and repeatable; CNC machining of aluminum alloy can produce parts with complex shapes that cannot be completed by manual processing. So how much do you know about the operating principles of aluminum alloy CNC processing? Let’s learn together.

1. The use environment of CNC equipment.

In order to improve the service life of CNC equipment, it is generally necessary to avoid direct sunlight and other thermal radiation, and to avoid places that are too humid, too much dust or corrosive gases. Precision CNC equipment should be kept away from equipment with high vibration, such as punching machines, forging equipment, etc.

CNC precision machining

2. Good power supply guarantee.

In order to avoid the influence of large power fluctuations (greater than ±10%) and possible instantaneous interference signals, mechanical processing CNC equipment generally uses dedicated line power supply (such as separate from the low-voltage distribution room for CNC machine tools) or additional voltage stabilization devices, etc. , can reduce the impact of power supply quality and electrical interference.

3. Formulate effective operating procedures.

In terms of the use and management of CNC machine tools, a series of practical and effective operating procedures should be formulated. For example, lubrication, maintenance, reasonable use and standardized shift handover systems are the main contents of the use and management of CNC equipment. Formulating and complying with aluminum alloy CNC machining operating procedures is one of the important measures to ensure the safe operation of CNC machine tools. Practice has proven that many failures can be reduced by following operating procedures.

As we all know, correct operation and maintenance is one of the key factors in the correct use of aluminum alloy CNC processing equipment. It can prevent abnormal wear of the machine tool and avoid sudden failures; daily maintenance, the equipment maintains a good technical condition and delays The deterioration process will promptly detect and eliminate hidden dangers of failure and ensure safe operation. The daily use requirements for precision parts processing enterprises to use aluminum alloy CNC processing are as follows:

1. After turning on the machine, you must preheat for about 10 minutes before processing; machines that are not used for a long time should extend the preheating time;

2. Check whether the oil circuit is unobstructed;

3. Before shutting down, place the workbench and saddle in the center position of the machine (moving the three-axis stroke to the middle position of each axis stroke);

4. Keep the machine tool dry and clean.

Aluminum alloy CNC processing equipment is relatively expensive, so proper operation and maintenance can prevent abnormal wear of the machine tool and avoid sudden machine tool failure. Careful maintenance of aluminum alloy CNC processing can maintain the long-term stability of machine tool processing accuracy and extend the service life of machine tool.