Precautions for precision parts processing

When machining precision parts , the operator must maintain the correct posture and have sufficient mental essence to arrange the work. If you find physical discomfort, you must ensure personal safety. You must immediately remove your job and go to the production workshop supervisor or higher level people reflect. The practical concepts are gathered, chatting is prohibited, and cooperation is carried out. Operators must not practice in situations of irritability and fatigue, so as to ensure personal safety, avoid accidents, and ensure operational safety. Before entering the job, ask whether their dress meets the job requirements. What other precautions are there in precision parts processing? Let's learn about it together below.

1. Before processing precision parts, check whether grease is added to the moving parts of the equipment, then start and check the clutch, whether the brake system is normal, and rotate the CNC lathe idle parts for 1-3 minutes. If there are common faults in mechanical equipment, it is prohibited to be actually done. operate;

2. When machining precision parts, maintain the correct posture and have sufficient mental and substantial responses. If you find physical discomfort, you must leave your post immediately and report it to your superiors. In practice, the concept is concentrated, gossip is prohibited and cooperation is prohibited. Operators must not operate in actual operation when they are irritable and tired, so as to avoid safety accidents and ensure practice. All employees check whether their dress meets the specifications before entering the position. Sandwiches, high heels and harmful clothing are not allowed, and hats should be worn when you have long hair;

3. When replacing the abrasive tool, the power supply is first cut off. Only after the high-speed punching machine movement unit stops running can the abrasive tool be installed and adjusted. After the installation and adjustment, move the pump flywheel hard twice to check whether the left and right abrasives are symmetrical, effective, whether the screws are firm, and whether the edge wrapping ring is in the effective position;

4. After all other staff members leave the mechanical equipment work area and take out the dirt on the workbench, they can start the mechanical equipment;

5. In precision parts processing, it is strictly forbidden to put your hands into the guide rail slide work area, and you must not forcefully pick up or put product workpieces. Special tools for picking and putting product workpieces in the punching mold. If you find that the machine and equipment have abnormal noise or the equipment is abnormal, you should immediately turn off the main switch for inspection. After the machine equipment is started, it is transported to the machine by one person. Others are not allowed to press the power building or step on the button switch board, and they cannot put their hands into the machine's work area or touch the machine's moving parts with force.

6. After get off work, the idle switch power should be turned off, and the workpieces, foot materials and dirt should be cleaned to ensure the clean office environment.

The above are the precautions for precision parts processing . I hope it will be helpful to you. If you want to know more about precision parts processing, please consult customer service online or call our service hotline (the upper right corner of the website), and we will We sincerely provide you with high-quality services!