Points to note when processing CNC of plastic handboard

Four points to pay attention to when processing plastic handboard CNC:

1. When using CNC to process plastic handboards, the problems that often arise are breakage, cracking, collapse, and scratching. After all, the knife speed is wrong and everything is in vain. Domestic plastic material suppliers are indeed of different quality, so they need to be tested for a short period of time during processing. If you are not in a hurry, different batches of materials need to be trial-made! What a different supplier gets out of recognition.

2. Another problem is the choice of knife. Do not use metal-processing tools to process plastic handboards. The hardness between different materials is different. For example, nylon material processing is not like processing metal. If you cut it, you will get a chip. Flying horizontally.

3. When arranging the CNC processing process of plastic handboards, the principle of gradual improvement should be based on the principle of coarseness and gradual improvement. First arrange heavy cutting and rough processing to remove the processing allowance on the blank, and then arrange contents with low processing accuracy requirements.

4. Adopt a high flow cooling method. In order to reduce the impact of the large amount of heat generated during processing on processing accuracy, to improve the durability of the tool, it is necessary to actively adopt a high flow cooling method.