CNC lathe processing should be reasonably selected

At present, CNC lathe processing is no longer a mysterious process. Many companies use it for production, but not everyone has the right technology. When processing CNC lathes, in order to obtain ideal conditions for use, coolant should be used or a tool with good rigidity should be used. So how should we choose the parts for CNC lathe processing? Let's learn about it together below:

1. Reasonable selection of tools:

1. During rough-carrying processing, tools should be selected to meet the requirements of back-cut and feeding during rough-carrying processing;

2. When fine-cut processing, high-precision and durable tools should be selected to meet the processing accuracy requirements;

3. In order to reduce the time of changing the tool and facilitate the alignment of the tool, the machine knot and machine knot should be used as much as possible.

2. Reasonable selection of fixtures:

1. Try to use general fixtures to clamp the workpieces and avoid using special fixtures;

2. After the part positioning reference overlaps, the positioning error decreases.

3. Determine the processing method:

1. It should be able to meet the requirements of processing accuracy and surface roughness;

2. The processing route should be shortened as much as possible to reduce the no-load time of the cutting tool.

4. The relationship between processing route and processing allowance:

At present, when the CNC lathe processing technology has not yet been popularized, the excess amount of blanks, especially those containing forged and cast hard skin, should be arranged to be processed on ordinary CNC lathes. If you want to process on a CNC lathe, you should pay attention to the flexibility of the procedure.

5. Key points for fixture installation:

Currently, the connection between the hydraulic chuck and the hydraulic clamping cylinder is by a pull rod. The clamping point is: first remove the nut on the hydraulic cylinder with a bracket, then remove the pull pipe, and remove the pull pipe from the spindle. Pull out the end and remove the chuck fixing screws with the bracket.

The above explanation is the reason why accessories should be selected reasonably during the CNC lathe processing process. I hope it will be helpful to you. If you want to know more about CNC lathe processing information, please call our service hotline (top right corner of the website) or consult online. , we will wholeheartedly provide you with high-quality services!