About CNC machining parts

With the prevalence of CNC processing, of course, many CNC processing manufacturers are inevitable. Every CNC processing manufacturer hopes to make the company bigger, so there must be a certain process. What we are going to talk about today is the process of paying attention to CNC machining parts.

1. When CNC machining parts, the protective door must be closed. The head and hands are not allowed to be stretched into the protective door. The protective door is not allowed to be opened during the processing of mechanical parts;

2. During the CNC processing process, the operator shall not leave the machine tool without authorization. He shall maintain a high concentration of thought and observe the operating status of the machine tool. If an abnormal phenomenon or accident occurs, the program should be terminated immediately, the power supply should be cut off and reported to the instructor in a timely manner, and no other operations shall be carried out;

3. It is strictly forbidden to slap the control panel or touch the display. It is strictly forbidden to knock on the workbench, indexing head, fixtures and guide rails;

4. It is strictly forbidden to open the CNC system control cabinet for viewing and touching;

5. Operators shall not change the internal parameters of the machine tool at will. Intern students are not allowed to call or modify other programs that are not compiled by themselves;

6. On the machine tool control microcomputer, no other operations are allowed except for program operations, transmission and program copying;

7. CNC CNC machining center is a large-scale precision machining equipment. Except for the workpieces and workpieces placed on the workbench, it is strictly forbidden to stack any work, clips, blades, measuring tools, workpieces and other debris on the machine tool;

8. It is prohibited to touch the tip of the knife and iron filings with your hands. Iron filings must be cleaned with an iron hook or brush;

9. It is prohibited to contact the rotating spindle, workpiece or other moving parts with your hands or any other means;

10. It is prohibited to measure workpieces or manually change the speed during processing, and you cannot wipe the workpieces with cotton wire or clean the machine tools;

11. When moving each axis position using a handwheel or fast movement method, be sure to see the ', -' signs in each direction of the machine tool X, Y, and Z axis before moving. When moving, turn the handwheel slowly to observe the direction of the machine tool movement before you can speed up the movement speed;

12. When the measurement of workpiece size must be paused during program operation, the measurement must be performed after the machine tool is completely stopped and the spindle is stopped to avoid personal accidents;

13. If the machine tool is not used for several days, the NC and CRT parts should be powered on for 2-3 hours every other day;

14. Clean and maintain the machine tool guide rails regularly;

15. When shutting down, wait for the spindle to stop for 3 minutes before shutting down.